The certificate for the IAEA 158A CRM is the only official source for the trace elements mass fractions certified values and their expanded uncertainties.
Certified mass fraction values
(based on dry mass)
Analyte | Certified value(a) [mg kg-1] | Expanded uncertainty(b) [mg kg-1] |
Al | 52.2 × 103 | 2.4 × 103 |
As | 12.0 | 1.0 |
Ba | 1.031 × 103 | 0.083 × 103 |
Ca | 65.3 × 103 | 2.8 × 103 |
Cd | 0.361 | 0.043 |
Ce | 54.1 | 5.6 |
Co | 9.19 | 0.90 |
Cr | 77.0 | 8.2 |
Eu | 1.098 | 0.085 |
Fe | 26.6 × 103 | 1.2 × 103 |
K | 20.5 × 103 | 1.5 × 103 |
La | 28.5 | 3.1 |
Li | 33.5 | 3.3 |
Mg | 10.86 × 103 | 0.58 × 103 |
Mn | 367 | 19 |
Na | 23.91 × 103 | 0.88 × 103 |
Nd | 25.1 | 2.6 |
Ni | 31.1 | 2.1 |
Pb | 41.0 | 5.2 |
Rb | 87.4 | 7.2 |
Sm | 4.64 | 0.52 |
Sr | 478 | 54 |
U | 2.40 | 0.33 |
V | 74.1 | 5.2 |
Y | 17.1 | 1.1 |
Yb | 2.02 | 0.24 |
Zn | 141 | 18 |
- (a) Information on calculation of certified values
Certified values are calculated from the accepted data sets, each set being obtained by a different laboratory and/or a different method of determination following ISO Guide 35 [1].
- (b) Information on method used for uncertainty estimation
The uncertainty is expressed as an expanded uncertainty with a coverage factor k = 2, corresponding to a 95% level of confidence, estimated in accordance with the JCGM 100:2008 [2] and ISO Guide 35 [1].
The assigned property values were established, considering the results reported by expert laboratories, participating in the characterisation campaign for the IAEA 158A. The characterisation campaign was organised by the IAEA Environment Laboratories in Monaco. The details concerning the production process and all reported results, as well as the criteria for the assignment of property values are presented in the certification report for the IAEA 158A.